Applied-motion SV7-C-CE Bedienungsanleitung PDF herunterladen (Seite 10)

SV7 Hardware Manual

920-0012F

12/18/2014

Seings 1 through E can be changed using the

QuickTuner™

soware. Seing 0 is always

“10.10.10.10”, the universal recovery address. If someone were to change the other seings and

not write it down or tell anyone (I’m not naming names here, but you know who I’m talking about)

then you will not be able to communicate with your drive. e only way to “recover” it is to use the

universal recovery address.

Seing F is “DHCP”, which commands the drive to get an IP address from a DHCP server on the

network. e IP address automatically assigned by the DHCP server may be “dynamic” or “static”

Rotary Switch IP Address

0 10.10.10.10

1 192.168.1.10

2 192.168.1.20

3 192.168.1.30

4 192.168.0.40

5 192.168.0.50

6 192.168.0.60

7 192.168.0.70

8 192.168.0.80

9 192.168.0.90

A 192.168.0.100

B 192.168.0.110

C 192.168.0.120

D 192.168.0.130

E 192.168.0.140

F DHCP

vice at 192.168.0.40, but not one at 192.168.1.40. If you change your subnet mask to 255.255.0.0

(Class B) you can talk to any device whose rst two octets match yours. Be sure to ask your system

administrator before doing this. You network may be segmented for a reason.

Your drive includes a 16 position rotary switch for seing its IP address. e factory default address

for each switch seing is shown in the table below.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 52 53

Keine Kommentare

Applied-motion SV7-C-CE Bedienungsanleitung Seite 10