
STM17 Quick Setup Guide
Requirements
A small at blade screwdriver for tightening the connectors (included). ▪
A personal computer running Microsoft Windows 98, 2000, ME, NT, XP, Vista or 7. ▪
ST Congurator™ ▪ software, available for download at www.applied-motion.com/products/software.
For SCL streaming command applications, please download the ▪ SCL Utility from the same page.
For -Q models, please download ▪ Q Programmer™.
For RS-232 models: an Applied Motion programming cable (included) ▪
For RS-485 models: an RS-422 or RS-485 port or adapter for your PC (see reverse for recommended RS-485 adapter) ▪
For more detailed information, please download and read the ▪ STM17 Hardware Manual,
available at www.applied-motion.com/support/manuals.
To begin, make sure you have the following equipment:
Step 1
Install the a) ST Congurator™ software.
Launch the software by clicking: b)
Start / Programs / Applied Motion Products / ST Congurator
Connect the drive to your PC using the RS-232 programming cable c)
or RS-422/485 adaptor
Step 2
Wire the drive to the DC power source. a)
(do not apply power until all connections to the drive have been made)
Note, the STM17 accepts DC voltages from 12-48V.
If using an external fuse, we recommend the following:
3AG, 2 amp slo blo (Littlefuse 313002.HXP)
Kommentare zu diesen Handbüchern