Applied-motion STM23C-3CE Bedienungsanleitung PDF herunterladen (Seite 23)

Once you’ve chosen an appropriate IP address for your drive, set the rotary switch according the address table

above. If none of the default addresses are acceptable for your network, you can enter a new table of IP ad-

dresses using Congurator. If your network uses addresses starting with 192.168.0, the most common subnet,

you will want to choose an address from switch seings 4 through E. Another common subnet is 192.168.1. If

your network uses addresses in this range, the compatible default selections are 1, 2 and 3.

If your PC address is not in one of the above private subnets, you will have to change your subnet mask to

255.255.0.0 in order to talk to your drive. To change your subnet mask:

1. On Windows XP, right click on “My Network Places” and select properties. On Windows 7, click Computer.

Scroll down the le pane until you see “Network”. Right click and select properties. Select “Change adapter

seings”

2. You should see an icon for your network interface card (NIC). Right click and select properties.

3. Scroll down until you see “Internet Properties (TCP/IP)”. Select this item and click the Properties buon. On

Windows 7 and Vista, look for “(TCP/IPv4)”

4. If the option “Obtain an IP address automatically” is selected, your PC is geing an IP address and a subnet mask

from the DHCP server. Please cancel this dialog and proceed to the next section of this

STM23 Hardware Manual

920-0021F

2/14/2012

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 47 48

Keine Kommentare

Applied-motion STM23C-3CE Bedienungsanleitung Seite 23