Applied-motion ST10-Plus Bedienungsanleitung PDF herunterladen (Seite 5)

ST5/10-S Hardware manual

920-0027 Rev. D

2/7/14

Getting Started

This manual describes the use of two different drive models, ST5-S & ST10-S. To get started, you’ll need the

following:

• A 24-48 volt DC power supply. (24 - 80VDC for ST10 model). Please read the

section entitled Choosing a Power Supply for help in choosing the right power supply.

• A compatible step motor. See section on Recommended Motors.

• A small at blade screwdriver for tightening the connectors (included).

• A personal computer running Microsoft Windows 98, 2000, NT, Me, XP, Vista or Windows 7.

• Relevant software applications, as outlined below. All software is available as a free download from http://

www.applied-motion.com/products/software.

• An Applied Motion programming cable (included)

If you’ve never used an ST drive before you’ll need to get familiar with the drive and the set up software before

you try to deploy the system in your application. We strongly recommend the following:

1. Launch the ST Congurator™ software by clicking Start...Programs...Applied Motion...

2. Connect the drive to your PC using the programming cable.

3. Connect the drive to the power supply.

4. Connect the drive to the motor.

5. Apply power to the drive.

6. The software will recognize your drive, display the model and rmware version and be ready for action.

1 2 3 4 5 6 7 8 9 10 ... 35 36

Keine Kommentare

Applied-motion ST10-Plus Bedienungsanleitung Seite 5