Applied-motion ST10-Plus Bedienungsanleitung PDF herunterladen (Seite 6)

ST5/10-S Hardware manual

920-0027 Rev. D

2/7/14

Connecting to the PC using RS-232

• Locate your computer within 8 feet of the drive.

• Your drive was shipped with a communication cable. Plug the large end into the serial port of your PC and the

small end into the jack on your drive. Secure the cable to the PC with the screws on the sides.

Never connect a drive to a telephone circuit. It uses the same connectors and cords

as telephones and modems, but the voltages are not compatible.

If your PC does not have a serial port, you should purchase a “USB Serial Converter”. We have had good results

with the Port Authority “USB Serial DB9” Adapter from CablesToGo.com and with the SW1301 from

SewellDirect.com. For 64 bit XP and Vista systems, the recommended USB serial adapter is USB-COM-CBL

from byterunner.com. This adapter also works for 32 bit Windows systems.

For laptops, a PCMCIA converter card is a good choice. Our applications engineers use the SSP-100 from Sewell

Direct.

Pin Assignments of the PC/MMI Port

(RJ11 connector)

ground (to PC ground)

TX (to PC RX)

No connection

RX (to PC TX)

1 2 3 4 5 6 7 8 9 10 11 ... 35 36

Keine Kommentare

Applied-motion ST10-Plus Bedienungsanleitung Seite 6