Applied-motion STR4 Bedienungsanleitung PDF herunterladen (Seite 16)

STR4/8 Hardware Manual

920-0030J

5/12/2015

FAULT Output

e STR drives feature a digital FAULT output. is output closes

to signal a fault condition.

is output can be used to drive LEDs, relays and the inputs of

other electronic devices like PLCs. e “+” (collector) and “-” (emier) terminals of the output

transistor are available at the connector. is allows you to congure the output for current

sourcing or sinking.

Diagrams of each type of connection follow.

Do not connect the output to more than 30VDC.

e current through the output terminal must not exceed 80 mA.

Sinking Output

STR

5-24 VDC

Power Supply

+ –

Load

FAULT-

FAULT+

STR

5-24 VDC

Power Supply

+ –

Load

FAULT-

FAULT+

Sourcing Output

Driving a Relay

STR

FAULT-

FAULT+

1N4935 suppression diode

5-24 VDC

Power Supply

+ –

relay

FAULT+

FAULT-

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 45 46

Keine Kommentare

Applied-motion STR4 Bedienungsanleitung Seite 16