Applied-motion STR4 Bedienungsanleitung PDF herunterladen (Seite 33)

STR4/8 Hardware Manual

920-0030J

5/12/2015

200

400

600

800

1000

1200

0 5 10 15 20 25 30 35 40

oz-in

rps

HT34 with STR8

Connection: Parallel

Power Supply 60V, 20,000 steps/rev

HT34-485

HT34-486

HT34-487

Motor Heating

Step motors convert electrical power from the driver into mechanical power to move a load.

Because step motors are not perfectly ecient, some of the electrical power turns into heat on

its way through the motor. is heating is not so much dependent on the load being driven but

rather the motor speed and power supply voltage. ere are certain combinations of speed

and voltage at which a motor cannot be continuously operated without damage.

We have characterized the recommended motors in our lab and provided curves showing the

maximum duty cycle versus speed for each motor at commonly used power supply voltages.

Please refer to these curves when planning your application.

Please also keep in mind that a step motor typically reaches maximum temperature aer 30 to

45 minutes of operation. If you run the motor for one minute then let it sit idle for one minute,

that is a 50% duty cycle. Five minutes on and ve minutes o is also 50% duty. However, one

hour on and one hour o has the eect of 100% duty because during the rst hour the motor

will reach full (and possibly excessive) temperature.

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 45 46

Keine Kommentare

Applied-motion STR4 Bedienungsanleitung Seite 33